CISCO NEXUS TITANIUM OVER VMWARE
Prerequisites:
1)
VMware Workstation
2)
Titanium-VM-5(1).2
Download from one of the following links to get a VMware
instance :
http://depositfiles.com/files/wxeo6gwo9
http://d01.megashares.com/dl/zgxJSx0/Titanium-VM-5(1).2.rar
http://bayfiles.com/file/vzfL/B0J4W1/Titanium-VM-5%281%29.2.rar
http://bitshare.com/files/iaqwp11h/Titanium-VM-5-1-.2.rar.html
https://netload.in/dateiNwQZwK3VFW/Titanium-VM-51.2.rar.htm
http://www.load.to/gmSSdskVB8/Titanium-VM-5_1_.2.rar
http://www.ziddu.com/download/21073586/Titanium-VM-51.2.rar.html
(Make sure you have the VMWARE installed on your PC)
http://depositfiles.com/files/wxeo6gwo9
http://d01.megashares.com/dl/zgxJSx0/Titanium-VM-5(1).2.rar
http://bayfiles.com/file/vzfL/B0J4W1/Titanium-VM-5%281%29.2.rar
http://bitshare.com/files/iaqwp11h/Titanium-VM-5-1-.2.rar.html
https://netload.in/dateiNwQZwK3VFW/Titanium-VM-51.2.rar.htm
http://www.load.to/gmSSdskVB8/Titanium-VM-5_1_.2.rar
http://www.ziddu.com/download/21073586/Titanium-VM-51.2.rar.html
(Make sure you have the VMWARE installed on your PC)
a) Extract the Titanium-VM-5(1).2.zip
file and
b) Double-Click on N7K-2 (.vmx) file.... Your VMware will open up and Power on the Machine.
You'll get the message :
" Loader Loading stage1.5."
Loader loading, please wait...
WARNING: Ancient bootloader, some functionality may be limited!
Now, don't let the above message bother you.
Carry out the following steps :
Configuring VMWARE Virtual Machine
Follow these steps to add a serial port to your VMWare Workstation virtual machine:
1.
Power off the VMWare machine
and do below steps
2.
Attach the serial port to your VM. Open your VM settings
dialog and click Add
3.
Select Serial Port
4.
Select Output
to named pipe and click Next
5.
Now you need to specify configuration for the named
pipe. Make sure you select “This end is the server” and “The other end in
an application” otherwise you won’t get any output from your console.
Click Finish.
Configuring
PuTTY Connection
When you launch PuTTY, you need to select Serial connection type, and then enter in the pipe name into the Serial Line text box:
When you launch PuTTY, you need to select Serial connection type, and then enter in the pipe name into the Serial Line text box:
NOTE:
The named pipe is created and deleted each time you power on, and power off
your VM.
When you launch PuTTY, you need to select Serial connection type, and then enter in the pipe name into the Serial Line text box:
